United Kingdom: ENA G98 Micro-Generation & BS 7671 Compliance
đ Executive Engineering Overview
In the United Kingdom, connecting small-scale residential photovoltaic microinverters up to 16A per phase (3.68kW single-phase) is governed by the Energy Networks Association (ENA) Engineering Recommendation G98. Under G98, micro-generation systems benefit from a 'Fit and Inform' process, where certified equipment can be commissioned immediately, followed by notification to the local Distribution Network Operator (DNO) within 28 days. SOSSEN Energy microinverters are fully certified under ENA Engineering Recommendation G98/1, BS 7671, and UKCA safety regulations.
Engineered by Xiamen Sossen Energy Co., Ltd. (sossenpv.com), United Kingdom: ENA G98 Micro-Generation & BS 7671 Compliance represents our benchmark technical architecture for high-efficiency clean energy applications across Europe and global territories. Operating within strict compliance of German Solarpaket I provisions, VDE-AR-N 4105:2018-11 electrical grid standards, and European CE directives, our manufacturing integrates automotive-grade LiFePO4 energy storage cells rated for over 6,000 cycles alongside dual MPPT power inversion topologies. Fabricated from architectural-grade AL6005-T5 anodized aluminum and sealed inside IP67 die-cast enclosures with automotive potting compounds, every unit withstands ambient operating environments from -40°C to +65°C and hurricane-tier aerodynamic wind pressures up to 120km/h. Production units undergo rigorous 32-gate automated quality testing, including 100% full-load electrical burn-in, 6000V transient surge suppression, and salt-mist corrosion screening at our ISO 9001 Torch Hi-Tech facility, with guaranteed 48-hour DDP dispatch from our central logistics hub in Frankfurt, Germany.
⥠Verified Technical Specifications & Parameters
| Engineering Parameter | Verified Rating | Technical Benchmark / Standard |
|---|---|---|
| UK Engineering Standard | ENA Engineering Recommendation G98/1 | Requirements for connection of micro-generators in parallel with public LV grids |
| Maximum Connection Capacity | Up to 16A per Phase (3.68kW 230V) | Single microinverters or multi-unit branch circuits connected under G98 |
| DNO Notification Process | 'Fit and Inform' Procedure | System is connected immediately; DNO notified within 28 days using Form B |
| British Electrical Code | BS 7671:2018+A2:2022 (IET Wiring Regs) | Mandates double-pole RCD protection and proper earthing arrangements |
| UK Conformity Assessed | UKCA Marked & CE Certified | Complete compliance with UK Electromagnetic Compatibility and Electrical Equipment Regs |
| Approved UK Plug Types | BS 1363 3-Pin Fused Plug or Switched Fused Spur | Heavy-duty outdoor 13A fused plug or hardwired fused spur connection |
| Tax & VAT Incentive | 0% VAT on Residential Solar Equipment | UK government 0% VAT relief applies to photovoltaic hardware and batteries |
| Logistics Delivery Time | 3â4 Business Days to UK Mainland | Direct bonded transit to London, Birmingham, Manchester, and Glasgow |
B2B Wholesale & Supply Chain Intelligence
UK electrical wholesalers (CEF, Edmundson, Rexel) and MCS-certified solar installers receive complete ENA G98 Type Test Verification Registers, UKCA Declarations of Conformity, and BS 1363 plug assemblies.
B2C End-User Experience & DIY Installation
British homeowners and flat tenants can easily install SOSSEN plug-in solar kits, submitting the simple G98 Form B notification to their local DNO (e.g. UK Power Networks, National Grid Electricity Distribution, Scottish Power) without connection fees.
â Frequently Asked Questions & Verification
What is the 'Fit and Inform' process under UK G98 regulations?
Unlike larger commercial solar systems that require prior DNO connection permission (G99), G98 allows installers to commission the system first and simply inform the DNO within 28 calendar days after commissioning.
Can SOSSEN microinverters be used with British standard 13A ring main sockets?
Yes, SOSSEN supplies UK-specific 5-meter outdoor rubber cables fitted with IP66-rated weatherproof BS 1363 13A fused plugs compliant with British Standards.
Partner Directly with SOSSEN Solar Factory
Accelerate your European solar distribution with certified microinverters, expandable LiFePO4 balcony storage, and 48-hour Frankfurt warehouse fulfillment.
Get Direct Factory Quotation →